Defines related to the SmartRF06 Evaluation Board with a CC26xxEM. More...

Files
file	board.h
	Header file with definitions related to the I/O connections on the TI SmartRF06 Evaluation Board with a CC26xxEM.

LED configurations
Those values are not meant to be modified by the user
#define	LEDS_RED 1
	LED1 (Red)

#define	LEDS_YELLOW 2
	LED2 (Yellow)

#define	LEDS_GREEN 4
	LED3 (Green)

#define	LEDS_ORANGE 8
	LED4 (Orange)

#define	LEDS_CONF_ALL 15

#define	PLATFORM_HAS_LEDS 1

LED IOID mappings
Those values are not meant to be modified by the user
#define	BOARD_IOID_LED_1 IOID_25

#define	BOARD_IOID_LED_2 IOID_27

#define	BOARD_IOID_LED_3 IOID_7

#define	BOARD_IOID_LED_4 IOID_6

#define	BOARD_LED_1 (1 << BOARD_IOID_LED_1)

#define	BOARD_LED_2 (1 << BOARD_IOID_LED_2)

#define	BOARD_LED_3 (1 << BOARD_IOID_LED_3)

#define	BOARD_LED_4 (1 << BOARD_IOID_LED_4)

#define	BOARD_LED_ALL

UART IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_UART_RX IOID_2

#define	BOARD_IOID_UART_TX IOID_3

#define	BOARD_IOID_UART_CTS IOID_UNUSED

#define	BOARD_IOID_UART_RTS IOID_UNUSED

#define	BOARD_UART_RX (1 << BOARD_IOID_UART_RX)

#define	BOARD_UART_TX (1 << BOARD_IOID_UART_TX)

#define	BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)

#define	BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)

Button IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_KEY_LEFT IOID_15

#define	BOARD_IOID_KEY_RIGHT IOID_18

#define	BOARD_IOID_KEY_UP IOID_19

#define	BOARD_IOID_KEY_DOWN IOID_12

#define	BOARD_IOID_KEY_SELECT IOID_11

#define	BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)

#define	BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)

#define	BOARD_KEY_UP (1 << BOARD_IOID_KEY_UP)

#define	BOARD_KEY_DOWN (1 << BOARD_IOID_KEY_DOWN)

#define	BOARD_KEY_SELECT (1 << BOARD_IOID_KEY_SELECT)

3.3V domain IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_3V3_EN IOID_13

#define	BOARD_3V3_EN (1 << BOARD_IOID_3V3_EN)

SPI IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_SPI_SCK IOID_10

#define	BOARD_IOID_SPI_MOSI IOID_9

#define	BOARD_IOID_SPI_MISO IOID_8

#define	BOARD_SPI_SCK (1 << BOARD_IOID_SPI_SCK)

#define	BOARD_SPI_MOSI (1 << BOARD_IOID_SPI_MOSI)

#define	BOARD_SPI_MISO (1 << BOARD_IOID_SPI_MISO)

LCD IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_LCD_MODE IOID_4

#define	BOARD_IOID_LCD_RST IOID_5

#define	BOARD_IOID_LCD_CS IOID_14

#define	BOARD_IOID_LCD_SCK BOARD_IOID_SPI_SCK

#define	BOARD_IOID_LCD_MOSI BOARD_IOID_SPI_MOSI

#define	BOARD_LCD_MODE (1 << BOARD_IOID_LCD_MODE)

#define	BOARD_LCD_RST (1 << BOARD_IOID_LCD_RST)

#define	BOARD_LCD_CS (1 << BOARD_IOID_LCD_CS)

#define	BOARD_LCD_SCK BOARD_SPI_SCK

#define	BOARD_LCD_MOSI BOARD_SPI_MOSI

SD Card IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_SDCARD_CS IOID_30

#define	BOARD_SDCARD_CS (1 << BOARD_IOID_SDCARD_CS)

#define	BOARD_IOID_SDCARD_SCK BOARD_IOID_SPI_SCK

#define	BOARD_SDCARD_SCK BOARD_SPI_SCK

#define	BOARD_IOID_SDCARD_MOSI BOARD_IOID_SPI_MOSI

#define	BOARD_SDCARD_MOSI BOARD_SPI_MOSI

#define	BOARD_IOID_SDCARD_MISO BOARD_IOID_SPI_MISO

#define	BOARD_SDCARD_MISO BOARD_SPI_MISO

ALS IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_ALS_PWR IOID_26

#define	BOARD_IOID_ALS_OUT IOID_23

#define	BOARD_ALS_PWR (1 << BOARD_IOID_ALS_PWR)

#define	BOARD_ALS_OUT (1 << BOARD_IOID_ALS_OUT)

ACC IOID mapping
Those values are not meant to be modified by the user
#define	BOARD_IOID_ACC_PWR IOID_20

#define	BOARD_IOID_ACC_INT IOID_28

#define	BOARD_IOID_ACC_INT1 IOID_28

#define	BOARD_IOID_ACC_INT2 IOID_29

#define	BOARD_IOID_ACC_CS IOID_24

#define	BOARD_ACC_PWR (1 << BOARD_IOID_ACC_PWR)

#define	BOARD_ACC_INT (1 << BOARD_IOID_ACC_INT)

#define	BOARD_ACC_INT1 (1 << BOARD_IOID_ACC_INT1)

#define	BOARD_ACC_INT2 (1 << BOARD_IOID_ACC_INT2)

#define	BOARD_ACC_CS (1 << BOARD_IOID_ACC_CS)

#define	BOARD_IOID_ACC_SCK BOARD_IOID_SPI_SCK

#define	BOARD_ACC_SCK BOARD_SPI_SCK

#define	BOARD_IOID_ACC_MOSI BOARD_IOID_SPI_MOSI

#define	BOARD_ACC_MOSI BOARD_SPI_MOSI

#define	BOARD_IOID_ACC_MISO BOARD_IOID_SPI_MISO

#define	BOARD_ACC_MISO BOARD_SPI_MISO

Device string used on startup
#define	BOARD_STRING "TI SmartRF06EB + CC26xx EM"

Detailed Description

Defines related to the SmartRF06 Evaluation Board with a CC26xxEM.

This file provides connectivity information on LEDs, Buttons, UART and other peripherals

This file can be used as the basis to configure other boards using the CC13xx/CC26xx code as their basis.

This file is not meant to be modified by the user.

Files